ECS battery charger AP-17

ECS® charger for lead batteries is available in two versions. We offer a 12V/20A or 24V/10A chargers that recharge batteries quickly and gently. Battery itself defines the necessary charging current controlled by ECS®. Charger can largely recover cells that were damaged by improper recharging. It provides up to 110% of rated capacity battery level. The charger has a built-in protection against short circuits and automatically recognizes the connection of the battery and starts charging. The battery is protected by a temperature probe (optional) and disconnects the charger if the battery overheats due to poor condition of cells in the battery. Operating temperature range is from 0°C to 30°C. Charging does not depend on stability of AC input voltage.
Charging with ECS® technology prevents the gasification of the electrolyte, heating and sulfatization that extend the battery life and reduces charging time.

Charging technology description

ECS stands for Electrode specific Charging System. This is a new technology for charging rechargeable batteries and it’s a small revolution in this field since the incredible results. According to this technology is possible to recharge the batteries very quickly and at the same time very delicate, since only the electrochemical battery charger dictates the manner and charging. Charging at high current is performed only when the cells can quickly take the energy and don’t heat or produce gas.

Conneciton

Charger is for charging only lead (Pb) batteries 12V (24V) and total capacity of at least 12Ah (6Ah). Battery capacity is not limited, but the recommended capacity is up to 300Ah.

  • Connect the charger to the battery with a wire at least 4mm2 (up to 2m). For longer distances use 6mm2 wire.
  • Connect the red wire to + battery terminal and black wire to – battery terminal.
  • Plug in the charger.
  • Turn on the switch on the back.
  • If everything is connected correctly the yellow LED indicator will turn on.
  • The green LED indicator will turn on when the battery is fully charged.

Technical details AP-09 12V / 20A Pb

Charger type: lead or gel
Battery capacity: min 12Ah
Rated voltage: 12V
Rated charging current (max): 20A (ECS pulse)
Battery charging: Electrode specific Charging System
Mains voltage: 195 – 242V
Network Frequency: 40 – 60Hz
Maximum power: 370VA
Ambient temperature: 0 – 30°C
Short-circuiting the terminals: fully protected
Wrong Polarity: protected with a fuse 30A
Input fuse: internal 3,15A
Cooling: fan controlled by a thermostat
Dimensions: 170 x 60 x 245mm
Weight: 1,9kg

Technical details AP-09 24V / 10A Pb

Charger type:lead or gel
Battery capacity: min 6Ah
Rated voltage: 12V
Rated charging current (max): 20A (ECS pulse)
Battery charging: Electrode specific Charging System
Mains voltage: 195 – 242V
Network Frequency: 40 – 60Hz
Maximum power: 370VA
Ambient temperature: 0 – 30°C
Short-circuiting the terminals: fully protected
Wrong Polarity: protected with a fuse 30A
Input fuse: internal 3,15A
Cooling: fan controlled by a thermostat
Dimensions: 170 x 60 x 245mm
Weight: 1,9kg

AP17 prospekt
AP17_24V.pdf